Sound frequency
Sound (or audio) frequency is the speed of the sound’s vibration which determines the pitch of the sound. Sound is caused by vibrations that transmit through a medium such as air and reach the ear or some other form of detecting device.
It is measured as the number of wave cycles that occur in one second, with the standard unit of measurement being Hertz (Hz)
Sound intensity is measured in Decibels (dB). This is a logarithmic scale in which an increase of 10 dB gives an apparent doubling of loudness.
A frequency of 1 Hz refers to one wave cycle per second, while 20 Hz refers to 20 per second, where the cycles are 20 times shorter and closer together.
The audio spectrum is the frequency range that is audible to humans. This generally spans from 20 to 20,000 Hz, although environmental factors influence the precise range for each individual.
Frequencies at the high end of the spectrum are the first to be negatively affected by age and/or hearing damage as a result of prolonged exposure to loud volumes or noise.
As well as intensity and frequency, sound also transmits information. For example, music or speech, transmit the information which people may perceive differently from other sounds.
Approved document E, Resistance to the passage of sound defines ‘frequency’ as:
The number of pressure variations (or cycles) per second that gives a sound its distinctive tone. The unit of frequency is the Hertz (Hz (formerly called ‘cycles per second’).
A ‘frequency band’ is a continuous range of frequencies between stated upper and lower limits. An ‘octave band’ is a frequency band in which the upper limit of the band is twice the frequency of the lower limit. A ‘one-third octave band’ is a frequency band in which the upper limit of the band is 2 times the frequency of the lower limit.
The sound-absorbing characteristics of materials vary significantly with frequency. Low-frequency sounds, below 500 Hz, tend to be more difficult to absorb whereas high frequencies sounds, above 500 Hz, are easier to absorb. A material's sound absorbing properties can be expressed by the sound absorption coefficient, alpha, as a function of frequency, where alpha ranges from 0 (total reflection) to 1.00 (total absorption).
Similarly, the sound insulation of materials varies with frequency. Low-frequency sounds tend to be attenuated less by passing through sound insulating materials than high-frequency sounds. As a result, the sound attenuation properties of materials are generally measured at a range of frequencies representative of normal human hearing and this is then compared to a reference frequency profile such as that defined in BS EN ISO 717-1 Acoustics. Rating of sound insulation in buildings and of building elements. Airborne sound insulation.
[edit] Related articles on Designing Buildings Wiki
- Acoustic consultant.
- Airborne sound.
- Approved Document E.
- Building acoustics
- Building Bulletin 93: acoustic design of schools.
- Building regulations.
- Flanking sound.
- Impact sound.
- Noise nuisance.
- Reverberation.
- Robust details certification scheme.
- Room acoustics.
- Sound absorption.
- Sound insulation.
- Sound power level.
- Sound reduction index (SRI).
- Sound v noise.
- Structure-borne sound.
Featured articles and news
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.